UTC Fire and Security FenwalNET 8000-ML - Page 112

Configuration and Programming
February 2011 3-12 P/N 06-237041-001
Figure 3-14. FenwalNET 8000-ML List Menu Functions (Cont’d - Fig. 2 of 4)
FOOTNOTES (Figure 3-14):
7 Active Events. Purpose: To view the list of active events by event type. Use this option to view
lower-level events such as trouble events whose display is suppressed by the concurrent
occurrence of higher-level events.
2. LIST
Cont’d
1. Pre-Alarm Events 
2. Alarm Events 
3. Supervisories 
4. Troubles 
4. Active Events 5. Programming
5. Current Time/Date 
1. EOC Program 
2. SLC Assignments 
3. On Board 
4. Backplane 
5. Control Modules 
6. General Alarm 
1. RDCM Config 
2. LAM Config 
3. Call for Service 
Enter RDCM Address (1-15):_*
Enter LAM Address (1-16):_*
SLC Module Selection
Enter SLC Module Number (1-8):_*
1. NACs  2. RNACs  3. Relays 
1. RNAC 
2. Relay 
3. City Tie 
4. PMU 
Enter Module Logical Address:_*
Enter Module Logical Address:_*
Enter Module Logical Address :_*
7
8
9