multiMATIC 700/2
Notes
10/2015 99 Training 0020228700_00
Communication fault: VR 71
Faulty eBUS plug connection, cable defective.
Switching off all relays.
S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11 sen-
sor fault
Faulty cable, incorrect plug connection, faulty
sensor
VR 91 remote control unit
Communication fault: VR 91
Faulty eBUS plug connection, cable defective.
No remote control for the heating circuit
Communication fault: VPM-W
Faulty eBUS plug connection, cable defective.
Communication fault: VPM-S
Faulty eBUS plug connection, cable defective.
Faulty eBUS plug connection, cable defective.
System diagram selection incorrect
No zone assignment for the remote control or the
controller
VR70/VR71 combination not perm.