multiMATIC 700/2
Notes
10/2015 55 Training 0020228700_00
4.4.2.5 Days away from home scheduling
This function allows you to set a period and a temperature for an extended absence.
You can specify the start and end date and the target room temperature.
Hot water generation and the circulation pump are switched off and frost protection is
activated.
While the "Days away from home scheduling" function is activated, this has priority
over the operating mode that has been set. After the specified time period has elapsed,
or if the function is cancelled, the operating mode that was previously set is reactivat-
ed.
4.4.2.6 Days at home scheduling
This function allows you to plan days that will be spent at home. Time periods, e.g. re-
ducing the target room temperature over the course of the day, do not need to be
changed.
Within the specified period, the heating installation works in "Automatic mode" and us-
es the day settings for "Sunday", which were set using the "Time programmes" func-
tion. Once this period has ended, the heating installation will go back to working in the
operating mode that was previously set.
This function has priority over the "Days away from home scheduling" function.
To Next Page
Loading...
