1.1 Installation
• The product is only designed for use in land-bound vehicles (except motorcycles).
• Make sure that the engine cannot be unintentionally started during installation.
Before installation
• Withdraw ignition key from ignition lock.
• Note down all data in temporary electronic memories.
• Before installation refer to the vehicle documents for details of vehicle type and any special features.
• Refer to the construction diagrams to find out the positions of the fuel/hydraulic/pneumatic and electrical lines.
• Take account of any modifications to the vehicle which have to be considered during installation.
• Failure to use the product correctly may cause harm to people, property and the environment. Therefore make sure you
use our product correctly.
• Basic knowledge of vehicle electrics and mechanics is necessary for installation to prevent harm to people, property and
the environment.
• The product has been developed, manufactured and tested in accordance with the basic safety requirements of EC di-
rectives and the acknowledged state of the art.
• Short circuits
Short circuits in the vehicle's wiring can cause cable fires, battery explosions and damage to other electronic systems.
Therefore disconnect the minus pole of the vehicle battery before starting work.
If the vehicle has supplementary batteries, the minus poles of these batteries should also be disconnected.
• Modifying or tampering with the product may affect safety. Therefore it must not be modified or tampered with.
• When removing/installing seats, covers and the like, make sure that you do not damage lines or release plug connec-
tions.
• Possible data loss
When the batteries' minus poles are disconnected, all the temporary electronic memories lose their entered data.
Therefore, note down all the relevant data for re-programming before disconnection.
1. Safety Instructions
Product Manual
Technische Änderungen vorbehalten Technical details subject to change
1 - 2
TU00-0736-0000002
0609
No smoking!
No naked flames or lights!