Go back to top Go back to ToC
The Per Stream 'Errors' screen displays the Current and Total error count of each stream:
Bit: Indicates errors related to test pattern (Bit Error or LSS [Pattern Loss])
BER: Bit Error Ratio
Frame Loss
Frame Loss %
Symbol: Declared when an invalid code-group in the transmission code is detected
FCS/CRC: Number of received frames with an invalid Frame Check Sequence (FCS)
Out of Sequence (OOS) frames
IP Checksum: (Layer 3 and 4 only) Invalid IP Frame Check sequence
IP chks(%)
Jabber frames: Number of received frames larger than 1518 bytes containing an invalid FCS
Runt frames: Number of received frames smaller than 64 bytes containing an invalid FCS
Throughput Results - Errors (Page 1) Throughput Results - Errors (Page 2) Throughput Results - Errors (Page 3)
Go back to top Go back to ToC
The Per Stream 'Events' screen displays a Date and Time stamped record of bit errors, alarms and other anomalies pertaining to
TX130M+_e-manual_D07-00-051P_RevD00
To Next Page
