Velodyne VLP-32C User Manual

10.2.3.10 Reset System 85
10.2.3.11 Network Configuration 86
10.2.3.12 Set Host (Destination) IP Address 86
10.2.3.13 Set Data Port 86
10.2.3.14 Set Telemetry Port 86
10.2.3.15 Set Network (Sensor) IP Address 86
10.2.3.16 Set Netmask 86
10.2.3.17 Set Gateway 86
10.2.3.18 Set DHCP 86
10.2.4 curl Example using Python 87
Chapter 11 • Troubleshooting
11.1 Troubleshooting Process 89
11.1.1 Turned DHCP On, Lost Contact With Sensor 90
11.2 Service and Maintenance 91
11.2.1 Fuse Replacement 91
11.3 Technical Support 92
11.3.1 Purchased through a Distributor 92
11.3.2 Factory Support 92
11.3.3 Support Desk 92
11.4 Return Merchandise Authorization (RMA) 92
Appendix A • Sensor Specifications
Appendix B • Firmware Update
B.1 Firmware Update Procedure 94
B.1.1 Special Procedure to Update Firmware 100
B.1.2 If An Error Occurs 101
Appendix C • Mechanical Diagrams
C.1 Interface Box Mechanical Drawing 103
C.2 VLP-32C Mechanical Drawing 104
Appendix D • Wiring Diagrams
D.1 Interface Box Wiring Diagram 106
8 VLP-32C User Manual

Velodyne VLP-32C Specifications

General

Brand	Velodyne
Model	VLP-32C
Category	Accessories
Language	English