Connecting to the Wave ISM 5-12
Chapter 5: Connecting to the Wave ISM from the administrator PC
Wave Server Installation Guide
To connect to the Wave ISM via a local modem connection:
1. Select Start > Settings > Network Connections and then click the new connection (for
example, Wave Modem Connection).
2. In the Connect dialog, enter the following information, and then click
Connect.
•
User name: GlobalAdministrator
•
Password: Vertical4VoIP!
Note: Password is case-sensitive.
3. Once you have established the connection, you can do the following:
• To establish a Remote Desktop session on the Wave ISM via the modem
connection, start Remote Desktop and then enter 192.168.210.1 (the IP address of
the Wave modem) in the
Computer field.
• To start the Global Administrator on the Wave ISM via the modem connection,
point your browser to 192.168.210.1 (the IP address of the Wave modem.) Then,
perform steps 6-9 on page 5-7.
To Next Page
