Vi.Be.Mac V3L - Setting Bobbin and Production Counters; Resetting Bobbin Counter; RESETTING PRODUCTION COUNTER (Start of Production)

VI.BE.MAC.S.p.A.
pag.10
10. SETTING BOBBIN AND PRODUCTION COUNTERS
Press the COUNTER key (the LED lights up) to enable the COUNTER function
Press the COUNTER key
SET
The following appears on the display:
D.SET 0000 U.SET 0000
DN 0000 UP 0000
Press the ENTER key
Insert the number of pieces per BOBBIN E.g.: 50 pieces
Press ENTER
This is the starting number of the BOBBIN counter
Insert 0 0 0 0 and ENTER
Insert the number of pieces per PRODUCTION E.g.:9999 pieces
Press ENTER
This is the starting number of the production counter
Insert 0000 and ENTER
FINAL SCREEN
D.SET 0050 U.SET 9999
DN 0000 UP 0000
10.1.RESETTING BOBBIN COUNTER
A) When the BOBBIN counter reaches the number SET and the buzzer sounds
The following appears on the display:
PUSH ENTER KEY
Press the ENTER key to reset the counter
B) If the BOBBIN finishes before reaching the number SET
Press the COUNTER key
SET
The following appears on the display::
D.SET 0000 U.SET 0000
DN 0000 UP 0000
Press the ENTER key
Insert a NEW number of pieces per spool (1 or 2 pieces less than set number)
Press ENTER
Insert 0 0 0 0
Press ENTER 3 times
10.2. RESETTING PRODUCTION COUNTER (start of production)
Press the COUNTER key
SET
The following appears on the display::
D.SET 0000 U.SET 0000
DN 0000 UP 0000
Press the ENTER key 4 times
Insert 0 0 0 0
Press ENTER