VI.BE.MAC.S.p.A.
pag.8
7. WRITING A PROGRAMME
Press WRITE
The display changes to:
WRITE DATA
1.MEMORY 2.FD
Press the 1 key to write the programme into the internal memory of the machine (Max.47 programmes)
Press the 2 key to write the programme onto a floppy disk (Max.149 programmes)
Press the number required and ENTER
Insert the programme number, referring to the following table:
PROGRAMME ORIGIN TYPE N° start N° end
VI.BE.MAC original programme A 100 249
VI.BE.MAC. original programme modified on the machine BA 400 549
Programme constructed on the machine B 600 749
Programme constructed and modified on the machine B 600 749
Confirm with ENTER
To write over, if the number already exists
Press 1 and ENTER
8. CANCELLING A PROGRAMME
Press the DELETE key
The following appears on the display:
DELETE DATA
1.MEMORY 2.FD
Select the drive from which to cancel the programme
Press the 1 key for the internal memory
Press the 2 key for Floppy Disk
Confirm the setting with ENTER
The following appears on the display:
1.PATT.No. INPUT
2.PATT.No.SEARCH
Press the 1 key and ENTER
Insert the programme number
Press ENTER
To Next Page
Loading...