VI.BE.MAC.S.p.A.
pag.32
22. PROGRAMMING
22.1.GENERAL SPECIFICATIONS
The MITSUBISHI PLK B 1006 machine is equipped with an extremely versatile and easy-to-use software.
To create a new sewing programme on a pocket, follow the instructions given below, which will take you,
step by step, all the way to saving the programme onto a Floppy Disk or into the Internal Memory.
22.1.1.MEMORY
The machine comes with a diskette that can contain 150 programmes and an internal memory that can
contain 47 programmes. For each programme, a maximum of 8000 stitches can be memorised.
The number of the programme memorised depends on the type selected.
From n°100 to n°249 for type A programmes
From n°400 to°447 for type BA programmes
From n°600 to°749 for type B programmes
22.1.2.STITCH LENGTH
Stitch lengths of between 0.1mm and 12.7mm can be programmed, in variations of 0.1mm. The machine
turns at its maximum speed with a stitch length of between 0.1 and 3.3mm.
22.1.3.SEWING SPEED
Four different types of speed may be selected (H – MD1 – MD2 – L) during the sewing programme.
The machine is calibrated for a maximum speed of 2300 rpm. The thread cutting speed is calibrated at 180
rpm.
22.1.4.CODES
A series of codes manage the operation of the machine or of any solenoid valves mounted. The codes may
be inserted into the sewing programme.
Type of codes used in the programmes:
FUN 1: Internal jig re-enter
22.1.5.METHOD OF PROGRAMMING
Press the TEACHING METHOD key to choose the type of seam.
Those present on the machine are:
P- P Straight seam Automatic Programming of stitches within a straight line.
A P1 Circle arc Automatic Programming of a circle arc with only 3 stitches.
A P1 Circle Automatic Programming of a circle with 3 stitches.
S 001 Irregular curves Programming insertion of a n° of stitches united by Irregular Curves
B 001 Open line Inserting of a n° of stitches united by Straight Lines.
POINT Programming stitch by stitch
To Next Page
Loading...