Vi.Be.Mac V3L - Modifying the Position of a Seam from a Specific Point to the End of the Programme, Moving the Stitches

VI.BE.MAC.S.p.A.
pag.52
23.9. MODIFYING THE POSITION OF A SEAM FROM A SPECIFIC POINT TO THE END OF THE
PROGRAMME, MOVING THE STITCHES
Lower the plates
Press the MODIFY key
The display changes to:
PRESS HOME KEY
Press the HOME key
The machine resets to the ORIGINAL POINT
Press the FUNCTION key
The display changes to:
CHANGE RETURN 1Y
FEED 2N
Press the 1 key and ENTER
The display changes to:
1 STITCH 2 SPEED 3 CODE 4 MOVE (B)
Press 1 and ENTER
The display changes to:
1 BLOK 2 FEED 3 DEL 4 ADD 5 MOD
Press 5 and ENTER to select MOD
The display changes to:
1 DATA FIX
2 DATA MOVE
Press 2 and ENTER
The display changes to:
1 STITCH - MOVE JOG+ SEW
Move with JOG+ to the start of the modification
Press ENTER
The display changes to:
STITCH - MOVE INPUT
X 000.0 Y 000.0 E
Move with the directional arrows as necessary. (E.g. 1.5 mm down)
Press ENTER
The display changes to:
MODIFY 1 1Y
STITCH - MOVE 2N
Press 1 and ENTER
Press the MODIFY key
The display changes to:
PRESS HOME KEY
Press HOME