Vi.Be.Mac V3L - Page 37

VI.BE.MAC.S.p.A.
pag.36
MAKE ARC 1 Y
DATA 2 N
Press 1 and ENTER
x
x
x
End of the seam
Press CODE
Press 1
Press ENTER
Press 1 to select TRIM
Press ENTER
Press RETURN
The machine automatically resets to the ORIGINAL POINT
Press END
Press HOME
Lower the jigs and test the programme with the JOG+ key and, if all goes well, press HOME
Try the programme and, if all goes well save it to memory
Try the programme and then save it to memory as follows:
Press WRITE
The display changes to:
WRITE DATA
1.MEMORY 2.FD
Press 1 to save the programme into the internal memory of the machine (Max.47 programmes)
Press 2 to save the programme onto the floppy disk (Max.149 programmes)
Confirm with ENTER
Insert a programme number between 600 and 749 in case of type B programme
Insert a programme number between 400 and 549 in case of type BA programme
Press ENTER
If this number is already in use, to write over the existing programme
Press 1 and ENTER