VI.BE.MAC.S.p.A.
pag.38
Press ENTER
• In there is a second LABEL start again from the stitch “X”
• If the program is finished
Press RETURN
The machine automatically resets to the ORIGINAL POINT
Press END
Press HOME
Lower the jigs and test the programme with the JOG+ key and, if all goes well
Press HOME
Lower the jigs and test the programme with the JOG+ key and, if all goes well
Press HOME
Try the program and if all goes well, save it to memory
Try the programme and then save it to memory as follows:
Press WRITE
The display changes to:
WRITE DATA
1.MEMORY 2.FD
Press 1 to save the programme into the internal memory of the machine (Max.47 programmes)
Press 2 to save the programme onto the floppy disk (Max.149 programmes)
Confirm with ENTER
Insert a programme number between 600 and 749 in case of a type B program
Insert a programme number between 600 and 549 in case of a type BA program
Press ENTER
If this number is already in use, to write over the existing programme
Press 1 and ENTER
To Next Page
Loading...