VI.BE.MAC.S.p.A.
pag.43
The display changes to:
START POINT JOG SEW
X xxxx Y yyyy E
Use JOG+ key to go to the end point of the modification (Point B).
Press ENTER
The following appears on the display::
MAKE BREAK 1Y
LINE DATA 2N
Press 1 and ENTER
Press the MODIFY key
The display changes to:
PRESS HOME KEY
Press HOME
Test the programme with the JOG+ key and, if all goes well to the end, press HOME
Try the programme and save it as follows:
Press WRITE
The display changes to:
WRITE DATA
1.MEMORY 2.FD
Press the 1 key to write the programme into the internal memory of the machine (Max.47 programmes)
Press the 2 key to write the programme onto the Floppy Disk (Max.149 programmes)
Confirm choice with ENTER
Insert a programme number, between 600 and 749 for a type B programme
Insert a programme number, between 400 and 549 for a type BA programme
Press ENTER
If this number is already in use, to overwrite the existing programme
Press 1 and ENTER
To Next Page
Loading...