VI.BE.MAC.S.p.A.
pag.55
The following appears on the display:
ENLARGE / REDUCE 1Y
FIX ST. NUMBER 2N
ATTENTION: Remove the external jig if point A = Central Point of the programme
Press 1 and ENTER
The following appears on the display::
PUSH HOME KEY
Press the HOME key
The machine resets to its ORIGINAL POINT
Press the CONVERT key to exit
The display changes to:
PUSH HOME KEY
Press HOME
Test the programme with the JOG+ key and, if all goes well to the end, press HOME
Try the programme while sewing and save it as follows:
Press WRITE
The display changes to:
WRITE DATA
1.MEMORY 2.FD
Press the 1 key to write the programme into the internal memory of the machine (Max.47 programmes)
Press the 2 key to write the programme onto the Floppy Disk (Max.149 programmes)
Confirm choice with ENTER
Insert a programme number, between 600 and 749 for a type B programme
Insert a programme number, between 400 and 549 for a type BA programme
Press ENTER
If this number is already in use, to overwrite the existing programme
To Next Page
Loading...