Victor CUTMASTER Service Manual

GENERAL INFORMATION CUTMASTER 10MM, 12MM
Manual 0-5230 1-7 General Informatio
n
1.06 Declaration of Conformity
Manufacturer: Victor Technologies International, Inc.
Address: 82 Benning Street
West Lebanon, New Hampshire 03784
USA
The equipment described in this manual conforms to all applicable aspects and regulations of the ‘Low Voltage Directive’ (European Council
Directive 2006/95/EC) and to the National legislation for the enforcement of this Directive.
The equipment described in this manual conforms to all applicable aspects and regulations of the "EMC Directive" (European Council Directive
2004/108/EC) and to the National legislation for the enforcement of this Directive.
Serial numbers are unique with each individual piece of equipment and details description, parts used to manufacture a unit and date of
manufacture.
National Standard and Technical Specifications
The product is designed and manufactured to a number of standards and technical requirements. Among them are:
• CSA(CanadianStandardsAssociation)standardC22.2number60forArcweldingequipment.
• UL(UnderwritersLaboratory)rating94VOflammabilitytestingforallprinted-circuitboardsused.
• CENELECEN50199EMCProductStandardforArcWeldingEquipment.
• ISO/IEC60974-1(BS638-PT10)(EN60974-1)(EN50192)(EN50078)applicabletoplasmacuttingequipmentandassociated
accessories.
• IEC60974-10applicabletoIndustrialEquipment-genericemissionsandregulations
• AS1674Safetyinweldingandalliedprocesses
.
• 2001/95/ECRoHSdirective.
• AS60974.1ArcWeldingEquipmentWeldingPowerSources.
For environments with increased hazard of electrical shock, Power Supplies bearing the
S
mark conform to EN50192 when
used in conjunction with hand torches with exposed cutting tips, if equipped with properly installed standoff guides.
• Extensiveproductdesignverificationisconductedatthemanufacturingfacilityaspartoftheroutinedesignandmanufacturing
process. This is to ensure the product is safe, when used according to instructions in this manual and related industry standards,
and performs as specified. Rigorous testing is incorporated into the manufacturing process to ensure the manufactured product
meets or exceeds all design specifications.
Victor Technologies has been manufacturing products for more than 30 years, and will continue to achieve excellence in our area of
manufacture.

Victor CUTMASTER Specifications

General

Brand	Victor
Model	CUTMASTER
Category	Welding System
Language	English