PAGE 68 VIDEONICS TITLEMAKER 3000
To remove the time and/or date display from your page, return to the
EFFECTS-IN menu and position the highlight at the bottom sub-menu. Move
to the clock/date symbol as chosen, and using the up or down arrow key,
change the clock/date symbol back to the “off” position (D6, on previous
page). The scroll and crawl symbols will reappear. Press NEW LINE/OK to
return to the edit screen.
Real-TimeClockand DateNotes
• The clock and date, when selected from the EFFECTS IN menu, will al-
ways display the current time and date.
• Duration (timed or infinite) can be set for the page containing the clock
and/or date either before clock/date are set or after, by moving from clock/
date position back to the first two symbols in the sub-menu (D1 & D2).
• The clock and date display is standard and cannot be changed to a differ-
ent font or size.
• The clock and date display following the last line of text on the page when
the page is played.
• The clock and date are not displayed during Effects In or Effects Out, but
will appear on the screen in between the effects.
• If time and/or date are selected to display, scroll and crawl cannot be se-
lected.
PlacingTime orDatein yourText
You can easily insert the time or date onto your page as a textual object —
one that will not change as time goes by and will be formatted with the rest of
the text. From the Edit Screen, position the cursor where you want the time
and/or date inserted, then press ACCENT + Z for time, ACCENT+Xfor
date. Remove the time/date insert as you would any other text on a line.
To Next Page
Loading...