Visioneer STROBE 500 - Unpack and Assemble the Scanner

SCANNER SETUP
13
S CANNER SETUP
This chapter includes:
• Unpack and Assemble the Scanner on page 14
• Connect the Scanner Power Cord on page 17
• Detach or Attach the Visioneer Strobe 500 on page 19
N
OTE: please disregard any information about setting up the scanner with the docking station if you did not
purchase the scanner with docking station combination box. After taking the scanner out of its box and plastic
bag, please remove all tape and foam from the scanner.