VISIONEER STROBE 500 SCANNER USER’S GUIDE
31
L OADING DOCUMENTS TO SCAN
This chapter includes:
• Scan from the Input Tray on page 32
• Scan from the Front Feed Tray on page 34
• Scanning Interfaces on page 39
This chapter illustrates scanning with the buttons on the scanner. After loading documents in the scanner, as
described below, you can also scan using the One Touch Button Panel on screen, or using a scanning application.
N
OTE: Always remove any staples or paper clips from documents before inserting them into the scanner.
Staples and paper clips can jam the feed mechanism and scratch the internal components. Also remove
any labels, stickers, or Post-It™ notes that may come off during the scanning process and get stuck in the
scanner. Misuse as described here will void your scanner’s warranty.
To Next Page
Loading...
