SCANNING FROM TWAIN AND WIA
159
From the Windows Control Panel
1. Click on the Driver settings tab.
2. Select Enable user compression and Remember compression.
Note that if these two options are grayed out and you cannot select them, then these options are not
available for your scanner.
3. Click on OK.
4. Open the scanner interface.
5. Change to the Advanced source configuration mode.
6. In the Document settings section click on the Advanced tab.
7. If your scanner and application supports compressed file transfers, the Compression option will now be
available.
SKEW DETECTION
This option detects when a page has been fed through at an angle. Select an option from the drop menu to turn
on this feature. When scanning, always make sure the paper guides have been properly adjusted to the width of
the documents in the input tray. This helps to prevent the pages from being pulled through at an angle.
To Next Page
Loading...
