Visonic PowerMaster-10 G2 Installer's Guide

5. PROGRAMMING
44 D-303222 PowerMaster-10/30 G2 Installer's Guide
5:MOTION CAMERA
Contains configurable features and parameters related to Motion Cameras for
Video Alarm Verification and forwarding of image clips to the Monitoring Station
and other remote subscribers via e-mail and/or MMS network.
5.6.6
6:UP/DOWNLOAD
Contains configurable connection information, access permission and security
codes related to the Upload/Download procedures via PSTN or GPRS.
5.6.7
To enter the "04.COMMUNICATION" menu and to select and configure an option, proceed as follows:
Step 1
Step 2
Step 3
Step 4
Select "COMMUNICATION"
Select Communication
Sub-menu option
Select the "Communication" Parameter you wish to configure




See
INSTALLER MODE

04.COMMUNICATION
1:PSTN TEL LINE
AREA CODE SKIP
5.6.2

LINE PREFIX
DIAL METHOD
2:GSM/GPRS/SMS
GPRS REPORT
GPRS PASSWORD
5.6.3

GSM REPORT
NETWORK ROAMING
SMS REPORT
GPRS ALWAYS ON
GPRS APN
GSM KEEP ALIVE
GPRS USERNAME
TRANS. PROTOCOL
SIM PIN CODE
3:C.S. REPORTING
01:REPORT EVENTS 
46:PSTN RETRIES
5.6.4

02:1
st
RPRT CHAN
47:GSM RETRIES
() These options
are available only to
the "Master Installer"
03:2
nd
RPRT CHAN
51:TEL AUTO TEST
04:3
rd
RPRT CHAN
52:AUTO-TST TIME
05:DUAL REPORT
53:COM.FAIL RPRT
11:RCVR1 ACCOUNT 
PSTN FAIL
12:RCVR2 ACCOUNT 
GSM/GPRS FAIL
16:PSTN/GSM RCV1 
61:CONFIRM ALARM
17:PSTN/GSM RCV2 
62:RECENT CLOSE 
21:IP RCVR 1 
63:ZONE RESTORE
22:IP RCVR 2 
64:SYST.INACTIVE
26:SMS RCVR 1 
65:TWO WAY VOICE
27:SMS RCVR 2 
66:24H ZONE RPRT
41:PSTN FORMAT 
4:PRIVATE REPORT
VOICE REPORT
SMS REPORT
5.6.5

REPORTED EVENTS
REPORTED EVENTS
See
also
User's
Guide
Chapter
6
Section
C.11
1st private tel #
1st SMS tel #
2nd private tel #
2nd SMS tel #
3rd private tel #
3rd SMS tel #
4th private tel #
4th SMS tel #
Redial attempts
Voice<-->private
Tel. acknowledge
5:MOTION CAMERA
IMAGE FORWARD
VIEW ON DEMAND
5.6.6

1st e-mail
VIEW TIME WINDOW
2nd e-mail
VIEW OTHER ALARM
3rd e-mail
4th e-mail
1st MMS tel #
2nd MMS tel #
3rd MMS tel #
4th MMS tel #
6:UP/DOWNLOAD
PSTN UP/DOWNLOAD
GPRS UP/DOWNLOAD
5.6.7

Remote access
Panel SIM Tel #
Mast. UL/DL code
1st caller ID#
Inst. UL/DL code
2nd caller ID#
UL/DL Modes
Up/Download tel#

Visonic PowerMaster-10 G2 Specifications

General

Model	PowerMaster-10 G2
Category	Security System
Wireless Technology	PowerG
Remote Control	Yes
Event Log	1000 events
Communication	GSM, PSTN, IP
Frequency	868 MHz
Type	Wireless
Operating Temperature	-10°C to +55°C
Humidity	Up to 85% non-condensing