Visonic PowerMaster-10 G2 Installer's Guide

APPENDIX A. Specifications
D-303222 PowerMaster-10/30 G2 Installer's Guide 69
PowerMaster-10 G2
PowerMaster-30 G2
Real Time Clock
(RTC)
The control panel keeps and displays time and
date. This feature is also used for the log file by
providing the date and time of each event
The control panel keeps and displays time and
date. This feature is also used for the log file by
providing the date and time of each event
Battery Test
Once every 10 seconds
Once every 10 seconds
A2. Wireless
PowerMaster-10 G2
PowerMaster-30 G2
RF Network
PowerG – 2-way synchronized Frequency
Hopping (TDMA / FHSS)
PowerG – 2-way synchronized Frequency
Hopping (TDMA / FHSS)
Frequency bands
(MHz)
433 – 434
868 - 869
912 – 919*
433 – 434
868 - 869
912 – 919*
Hopping
frequencies
8
4
50
8
4
50
Region
Worldwide
Europe
North
America and
selected
countries
Worldwide
Europe
North
America and
selected
countries
Encryption
AES-128
Note: AES-128 bit encryption for
communication between control unit and
initiating devices is not suitable as a means of
Encrypted Line Security in UL Listed product.
AES-128
Note: AES-128 bit encryption for
communication between control unit and
initiating devices is not suitable as a means of
Encrypted Line Security in UL Listed product.
* For UL Listed product, enable this frequency band.
A3. Electrical
PowerMaster-10 G2
PowerMaster-30 G2
External AC/AC
adaptor
Europe: 230VAC 50Hz input, 9VAC 700mA
output.
USA: 120VAC 60Hz input, 9VAC 1000mA
output.
NA
External AC/DC
adaptor
-
External (wall-mounted) switching power
supply 100VAC to 240VAC, 50/60 Hz, 0.5A /
12.5 VDC, 1.6A
Internal AC/DC
Internal switching power supply:
Input: 100-240VAC, 0.12 A Max.
Output: 7.5VDC, 1.2A Max.
Internal switching power supply:
Input: 100-240VAC, 0.5A
Output: 12.5 VDC, 1.6A.
Current Drain
Approx. 70 mA standby, 1200 mA peak at full
load.
Approx. 40 mA standby, 1400 mA at full load.
Low Battery
Threshold
4.8 V
7.2 V (6-cell battery pack)
9.6 V (8-cell battery pack)
Backup Battery
Pack
4.8V 1300 mAh, rechargeable NiMH battery
pack, p/n GP130AAM4YMX, manufactured by
GP or equivalent.
4.8V 1800 mAh, rechargeable NiMH battery
pack, p/n GP180AAM4YMX, manufactured by
GP or equivalent (special order).
4.8V 2200 mAh, rechargeable NiMH battery
pack, p/n GP220AAM4YMX, manufactured by
GP only. For UL Listed product, use this
battery only.
Caution! Risk of explosion if battery is
replaced by an incorrect type. Dispose of
used batteries according to the
manufacturer's instructions.
Note: For compliance with UL standards the
battery backup period shall exceed 24 hours
and 12 hours for compliance with CE
standards.
Backup Battery Options:
Backup period
Maximum external devices current (1)
1300 mAh
6 Battery
Pack (2)
1800 mAh
8-Battery
Pack (3)
2200 mAh
8-Battery
Pack (4)
4h
210mA
300mA
380mA
8h
90mA
160 mA
200mA
12h
45mA
90 mA
120 mA
24h
0mA
25 mA
45mA
36h
(no backup)
5mA
15mA
48h
(no backup)
(no backup)
0mA
1. Devices that are connected between 12V
terminal and GND of PowerMaster-30 G2 that
includes internal GSM and proximity reader.
2. 7.2V 1300 mAh, rechargeable NiMH battery
pack, p/n GP130AAH6BMX, manufactured
by GP only. For UL Listed product, use this
battery only.
3. 9.6V 1800 mAh, rechargeable NiMH battery
pack, p/n GP180AAH8BMX, manufactured

Visonic PowerMaster-10 G2 Specifications

General

Model	PowerMaster-10 G2
Category	Security System
Wireless Technology	PowerG
Remote Control	Yes
Event Log	1000 events
Communication	GSM, PSTN, IP
Frequency	868 MHz
Type	Wireless
Operating Temperature	-10°C to +55°C
Humidity	Up to 85% non-condensing