Name: Visonic POWERMASTER-10 - INSTALLER GUIDE
Brand: Visonic
Rating: 4 (1 reviews)

To Next Page

To Previous Page

D-302756 27

Select between "disable on fail" and "enable on fail".

You can now press the or button to program any other

menu in "

DEFINE PANEL

" or press the button to take you to "

<OK>

TO EXIT

4.7 Event Reporting Configuration

4.7.1 General

The PowerMaster-10 system uses an IP platform that supports GSM and GPRS cellular communication and

broadband to forward all events received at the control panel to the monitoring station.

4.7.2 Setup Report Communicators

4.7.2.1 Configuring PSTN / GSM Communicators

Repeat steps 1 to 4 of section 4.2 "Entering the Installer Menu".

TEL. AREA CODE

Enter the system tel. area code (up to 4 digits).

LINE PREFIX

Enter the number that is used as a prefix to access an outside telephone

line (if exists).

Here you determine the dialing method used by the automatic dialer built

into the PowerMaster-10 control panel.

10.

11.

Select between "Pulse" and "tone (dtmf)".

12.

27:SIREN ON LINE

disable on fail



Pulse



DIAL METHOD

LINE PREFIX

AREA CODE

1:PSTN/GSM

DEFINE COMM.

Questions and Answers:

Need help?

Do you have a question about the Visonic POWERMASTER-10 - INSTALLER GUIDE and is the answer not in the manual?

Visonic POWERMASTER-10 - INSTALLER GUIDE Specifications

General