Name: Visonic POWERMASTER-10 - INSTALLER GUIDE
Brand: Visonic
Rating: 4 (1 reviews)

To Next Page

To Previous Page

62 D-302756

4.13 Configuring Remote Programming Access Permissions

Repeat steps 1 to 4 of section 4.2 "Entering the Installer Menu".

Here you give or deny permission to access the system and exercise

control from a remote telephone.

Select between "rem. access ON" and "rem. access OFF"

10.

Here you set the master installer 4-digit password for downloading/

uploading data to/from the PowerMaster-10 memory.

11.

Enter the 4-digit master download code ("0000" is not a valid code).

12.

13.

Here you set the installer 4-digit password for downloading data into the

PowerMaster-10 memory.

Attention! If "0000" is used, it will not enable connection of the

PowerMaster-10 to the PC for upload/download purpose.

14.

Enter the 4-digit installer download code ("0000" is not a valid code).

15.

16.

Here you determine whether the PowerMaster-10 data can be uploaded

into a computer while the system is in disarm state or at any time (in

HOME/AWAY arming & disarm state).

Inst. Downl code

Mast. Downl code

Remote access

REPORT EVENTS

Upload option

Remote access

rem. access ON



downl.code BBBB

Inst. Downl code

downl.code AAAA

Mast. downl code

PSTN UP / DOWN

3:C.S. REPORTING

1:PSTN/GSM

DEFINE COMM.

Questions and Answers:

Need help?

Do you have a question about the Visonic POWERMASTER-10 - INSTALLER GUIDE and is the answer not in the manual?

Visonic POWERMASTER-10 - INSTALLER GUIDE Specifications

General