EasyManua.ls Logo

WAGNER Prima Sprint Airfluid - Mounting the Control Unit; Connection Requirements and Mains Power

WAGNER Prima Sprint Airfluid
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
Prima Sprint.
1
2
3
P_01133
4
OPERATING MANUAL
VERSION 07/2009 ORDER NUMBER DOC 2305835
The assembly of the manual powder system is the same for the Corona spray gun and for
the Tribo spray gun.
The manual system is equipped with a fi lter water separator 4 as standard. Nevertheless,
a high compressed air quality is still required for safe operation of the system. The system
operator is responsible for ensuring that the necessary compressed air quality is provided.
5.2 MOUNTING THE CONTROL UNIT
Procedure:
1. Carefully take control unit 1 out of
packaging and use the screws 2
supplied to screw to the holes drilled in
the angle bracket 3.
SIHI_05034_ENG
WARNING
Outgoing air containing oil!
Risk of poisoning if inhaled
 Provide water-free and oil-free compressed air (quality standard
3.5.2 as per ISO 8573.1) 3.5.2 = 5 μm / +7°C; 44.6°F / 5mg/m³.
5.3 CONNECTION REQUIREMENTS

Table of Contents

Related product manuals