59
Prima Sprint.
%
0
10
20
30
40
50
60
70
80
90
100
Ø
12
10
11
9
8
m /h
5.0
4.0
3.0
2.0
6.0
3
5.5
4.5
3.5
2.5
2.2
m
/h
4.0
3.0
2.0
1.0
0.5
0.4
0.3
0.2
0.1
1.5
P_01137
E
PG
SPRINT
17
OPERATING MANUAL
VERSION 07/2009 ORDER NUMBER DOC 2305835
6.9 PERFORMING A COLOR CHANGE (3L/60L CONTAINER)
Procedure:
1. Release the trigger on the spray gun.
● The high-voltage and the powder feed are
deactivated.
2. Remove the injector from the holder to stop powder
feed.
3. Guide the gun into the spray booth and start the
purge function by pressing the “rinse“ button 17.
The injector and hoses are purged.
4. Switch off the control unit.
5. Open the powder container and clean all powder
feeding parts of the unit, such as the spray gun,
the injector, the powder feed hose and the suction
system.
6. Clean the powder container and pay special
attention to the fl uid base.
Hint:
Proper fl uidization is not possible with a damaged
and/or clogged fl uid base.
To adapt the programs to the new applications proceed as described in chapter 6.3
“Coating programs“.
Hint:
For a color change, all components of the powder feed system must be thoroughly
cleaned.
6.9.1 CLEANING PROCESS WHEN USING A SINGLE POWDER CONTAINER
To Next Page
Loading...
Need help?
General
