94
Prima Sprint.
1
2
P_01185
OPERATING MANUAL
VERSION 07/2009 ORDER NUMBER DOC 2305835
9.4.2 SWITCHING THE GUN TYPES
Procedure:
(For example: switching from Corona to Tribo)
1. Switch off control unit with switch 1 on rear.
2. Change the coating powder from Corona to Tribo.
3. Disconnect the hose 2 (black, atomizing air) from the Corona gun and connect it to the
Tribo gun (Tribo air).
4. Disconnect the powder feed hose of the Corona spray gun from the powder injector
and connect the Tribo gun hose on the powder injector.
5. Set the switch C on the switchbox to Tribo.
Hint:
Clean thoroughly the powder residues from all powder-conveying parts, before changing
to another gun type.
To Next Page
Loading...
Need help?
General
