WAREMA Wisotronic - User Manual

Wisotronic 1-channel
Operating instructions
(Keep for future use)
Photo: Habermaass GmbH
Sun. Light. WAREMA.Valid from 1st July 2014
890557_d•en

Summary

Introduction

3.1 Operating elements

Safety Instructions

2 Safety instructions

General safety information and warnings regarding the Wisotronic control system.

2.1 Meanings of symbols and pictographs

Explanation of warning symbols (DANGER, WARNING, CAUTION) and instructional pictograms.

2.2 Intended use

Defines the proper use of the Wisotronic and safety precautions for window drives.

2.3 Target group

Identifies the intended audience for these instructions and emphasizes qualified personnel.

2.4 General safety instructions

Key safety guidelines for operating automatically controlled sun shading systems.

2.5 Working safely

Precautions for electrical installation and safe handling of mechanisms.

2.6 Retrofitting and modifications

Guidelines and warnings concerning system modifications and component replacements.

Menu Structure

4 Menu structure

Getting Started

5 Getting started

Introduction to the initial setup and operation of the Wisotronic.

5.1 Start menu

Description of the Wisotronic's start menu elements and navigation.

5.1.1 Status display

5.2 Main menu

Navigating and understanding the Wisotronic's main menu options.

5.3 Example for operation: Set time and date

Step-by-step guide on how to set the date and time on the Wisotronic.

5.4 Example for operation: Set display

Instructions for adjusting display settings and changing operating element behaviour.

Operating

6 Manual operation

How to operate connected products directly via the Wisotronic control panel.

Set Functions

7 Set functions

Introduction to basic and comfort functions for quick operation.

7.1 Basic functions

Core settings for new users to quickly configure the Wisotronic.

7.1.1 Sun control ON;OFF

Activating or deactivating the automatic sun control feature.

7.1.2 Brightness

7.1.4 Dawn;dusk control ON;OFF

7.1.5 Dawn;dusk

7.1.6 Temperature control ON;OFF

7.1.7 Temperature

7.1.8 Precipitation monitor ON;OFF

Enabling or disabling the precipitation monitoring safety function.

Convenience Functions

7.2 Convenience functions

Advanced settings for automatic sun shading control based on user preferences.

7.2.1 Sun control

Configuration of automatic sun shading based on brightness levels.

7.2.1.1 Sun control ON;OFF

Enabling/disabling the sun control feature for a channel.

7.2.1.2 Limit value SUN

Setting the brightness threshold for lowering sun shading products.

7.2.1.3 Delay SUN

Assigning a delay time to prevent immediate reaction to brightness changes.

7.2.1.4 Position SUN

Defining the position for sun shading products when sunshine is detected.

7.2.1.5 Slat angle SUN

7.2.1.6 Limit value CLEAR

Setting brightness for medium position and slat tilt in clear sky conditions.

7.2.1.7 Delay CLEAR

7.2.1.8 Position CLEAR

7.2.1.10 Limit value CLOUD

Setting the brightness threshold for raising sun shading products.

7.2.1.11 Delay CLOUD

7.2.1.12 Position CLOUD

7.2.1.14 Limit values of the sun control

Guidelines for setting SUN, CLEAR, and CLOUD limit values for optimal sun control.

7.2.1.18 Correct use of the sun control

Illustrates how brightness changes affect sun control operation with delay times.

7.2.1.19 The sun control during a wind, precipitation or ice alarm

Dawn;Dusk Control

7.2.2 Dawn;dusk control

Configuration for automatic sun shading based on lighting conditions at dawn/dusk.

7.2.2.1 Dawn;dusk control ON;OFF

Enabling or disabling the dawn/dusk control for a channel.

7.2.2.2 Limit value DAWN

Setting brightness threshold for moving products at dawn.

7.2.2.3 Position DAWN

7.2.2.6 Limit value DUSK

Setting brightness threshold for moving products at dusk.

7.2.2.7 Position DUSK

7.2.2.15 Using dawn;dusk control correctly

Illustrates dawn/dusk control operation based on brightness changes.

7.2.2.16 The dawn;dusk control during a wind or ice alarm

Temperature Control

7.2.3 Temperature control

Automatic temperature-dependent control of sun shading products.

7.2.3.1 Basic functions

Overview of temperature control operating modes and requirements.

7.2.3.2 Temperature control ON;OFF

Activating or deactivating the temperature control per channel.

7.2.3.3 Limit value WARM

Setting the temperature limit for lowering products to provide shade.

7.2.3.4 Position WARM

Defining the product position for operation at higher temperatures.

7.2.3.5 Slat angle WARM

7.2.3.6 Limit value COLD

Setting the temperature limit for raising products to allow sunlight.

7.2.3.7 Position COLD

Defining the product position for operation at lower temperatures.

7.2.3.8 Slat angle COLD

7.2.3.9 Operating mode, selecting

7.2.3.13 Difference temperature control

Control based on difference between inside and outside temperatures.

Precipitation Monitor

7.2.4 Precipitation monitor

Safety function to protect fabric products from precipitation.

7.2.4.1 Precipitation monitor ON;OFF

Enabling or disabling the precipitation monitor.

7.2.4.3 Position PRECIPITATION

Intermittent Ventilation

7.2.5 Intermittent ventilation

Comfort function for preventing mould and ensuring fresh air via timed window control.

7.2.5.1 Intermittent ventil. ON;OFF

Time Switch

7.2.6 Time switch

Programming specific times for raising or lowering sun shading products.

7.2.6.1 Time switch ON;OFF

Cold Protection

7.2.7 Cold protection

Function to prevent excessive cooling by locking automatic controls below a temperature.

7.2.7.1 Cold protection ON;OFF

7.2.7.2 Blocking temperature

Setting the outside temperature limit for raising products or closing windows.

7.2.7.3 Position COLD

Manual Operation

7.2.10 Manual operation

Performing settings for manual operation of channels.

7.2.10.1 Position DOWN

Defining the product position for manual DOWN operation.

7.2.10.2 Slat angle DOWN

7.2.10.4 The manual operation options

Hand-held Transmitter

7.2.11 Hand-held transmitter allocation

Assigning WAREMA EWFS hand-held transmitters to Wisotronic channels.

7.2.11.1 Hand-held transmitter 1

Channels, Groups, Scenes

7.3 Manage channels, groups, scenes

7.3.2 Manage scenes

Creating, storing, and retrieving scenes for automated actions.

System Settings

7.5 System settings

Performing basic settings for the control unit and connected sensors.

7.5.1 Date; time

Setting the current date and time on the Wisotronic.

7.5.2 Display

Adjusting display view and behaviour of operating elements.

7.5.4 Language

Setting the operating language of the Wisotronic interface.

7.5.5 Sensor compensation

Comparing and adjusting internal/external temperature sensor readings.

7.5.5.1 Control panel temperature

7.5.5.2 Weather station 1 (2,3) outside temperature

7.5.7 Restore settings

Safety Functions

7.9 Safety functions

Overview of safety functions designed to protect sun shading products.

7.9.1 Wind monitoring

Safety function to protect products from wind damage by moving them to a safe position.

7.9.2 Ice monitor

Safety function to prevent damage from frozen guide rails.

7.9.2.1 Automatic reset ice alarm?

Setting whether the ice monitor automatically resets an ice alarm.

7.9.2.2 Manual reset ice alarm?

Procedure for manually resetting an ice alarm to avoid product damage.

Measured Values, Triggers, and Faults

8 Measured values, triggers and faults

8.1 Current measured values

8.2 Measured values history

8.3 Current triggers

8.5 Faults

Displaying a numbered list of faults in chronological order.

Troubleshooting

14 Troubleshooting

Guide to diagnosing and resolving common problems with the Wisotronic.

WAREMA Wisotronic Specifications