Waters TQ Detector User Manual

Solvents used to prepare mobile phases C-3
Solvents used to prepare mobile phases
These solvents are the most common ingredients used to prepare mobile
phases for reverse-phase LC/MS (API):
•Water
• Methanol
• Acetonitrile
• Formic acid (<0.1%)
• Acetic acid (<0.1%)
• Trifluoroacetic acid (<0.1%)
• Ammonium acetate (<10 mM)
• Ammonium formate (<10 mM)
These solvents are not expected to cause any problems with the materials
identified in “Items exposed to solvent” on page C-2.
Trap bottle push-in fittings Nitrile butadiene rubber, stainless
steel, polybutylene terephthalate,
and polyoxymethylene
Items exposed to solvent
Item Material

Waters TQ Detector Specifications

General

Brand	Waters
Model	TQ Detector
Category	Measuring Instruments
Language	English