Preparing the IntelliStart Fluidics system 2-7
Preparing the IntelliStart Fluidics system
For additional information, see “Connecting the liquid waste line” on
page B-23.
Installing the solvent manifold drip tray
Required material
Chemical-resistant, powder-free gloves
To install the solvent manifold drip tray
Install the solvent manifold drip tray as shown below:
Warning: The solvent manifold drip tray can be contaminated
with biohazardous and/or toxic materials. Always wear
chemical-resistant, powder-free gloves while performing this
procedure.
To Next Page
Loading...
