Waters TQ Detector - IntelliStart Fluidics System

IntelliStart Fluidics system 1-17
IntelliStart Fluidics system
Overview
The IntelliStart Fluidics system is built into the instrument. The system
delivers sample directly to the MS probe in one of two ways:
• From the LC column.
• From two integral reservoirs.
Tip: The integral reservoirs can also deliver sample through direct or
combined infusion to enable optimization at analytical flow rates.
The system incorporates a multi-position valve with these attributes:
• An input connection from an external LC column.
• An input connection from the instrument’s infusion syringe. (The
infusion syringe is also connected to two reservoirs, A and B. In the
software, you specify which reservoir to draw from.)
• An output connection to the probe.
• An output connection to a waste line.
IntelliStart Fluidics system
Column
LC
LC Waste
Probe
Syringe
Idle
Reservoir A Reservoir B
Off
Off
B
A