Cleaning the instrument’s exterior 5-11
Cleaning the instrument’s exterior
Use a soft cloth, dampened with water, to clean the outside surfaces of the
instrument.
Emptying the exhaust trap bottle
Check the exhaust trap bottle in the instrument exhaust line daily and empty
it before it is completely full.
Instrument exhaust trap bottle
Required materials:
• Chemical-resistant, powder-free gloves
• snoop
®
(or equivalent) leak detector liquid
Caution: Do not use abrasives or solvents to clean the instrument’s
case.
From instrument
exhaust connection
(12-mm OD)
To laboratory
exhaust port
(10-mm OD)
To Next Page
Loading...
