Waves Y56K User Manual

7. SRC - Source Selection
Click on an effect chain’s SRC button to open a popup menu (below) allowing the audio source for that
effect chain pair to be switched between the card’s lightpipe I/O and the AW.
Console
Select Console to switch the input of the effect chain pair to the AW. The effect chain pair now “lis-
tens” for audio from the AW.
N
N
ot
ot
e!
e! Source switching applies to effect chain pairs. For example, switching effect chain 1 to ADAT
also switches effect chain 2.
ADAT
Select ADAT to switch the input of the effect chain pair to the ADAT. The effect chain pair now “lis-
tens” for audio from the ADAT input.
N
N
ot
ot
e!
e! Source switching applies to effect chain pairs. For example, switching effect chain 1 to ADAT
also switches effect chain 2.
8. Group selection
Click an effect chain’s GRP button to open a popup menu (below) that combines two effect chains into a
stereo pair.
Mono
Select Mono to break the stereo pairing of the two effect chains. The two effect chains now operate
as independent mono effect chains.
Stereo
Select Stereo to combine the two effect chains into a stereo pair. The two effect chains now operate
as one stereo pair.
Y56K User Guide
30

Waves Y56K Specifications

General

Brand	Waves
Model	Y56K
Category	Computer Hardware
Language	English