Switching between mono and stereo
Switching an effect chain with inserted effects between mono and stereo (either way) allows you to
substitute its inserted effects with their mono/stereo counterpart effects and copies their presets to
the new effects.
S
S
w
w
it
it
c
c
hing a mono e
hing a mono e
ff
ff
ec
ec
t c
t c
hain t
hain t
o st
o st
e
e
r
r
eo
eo
Switching a mono effect chain to stereo displays the following dialog box:
Clear
Choose Clear to delete all effects from the chain and switch it to stereo grouping.
If the adjacent effect chain (i.e., the one the selected effect chain will be paired with) con-
tains effects, they will be deleted as well. For example, switching effect chain 1 to stereo
while effect chain 2 contains effects, also clears effect chain 2.
Clear results in an empty stereo effect chain.
Chn
Click on one of the Chn buttons to copy the effects from the selected mono chain to the
new effect chain, switching it to stereo.
For example, to convert two mono effect chains (1 and 2) each with their own effects to
stereo:
1. Select Stereo from the GRP menu.
The MONO TO STEREO dialog box appears.
2. Click on the Chn 1 button to switch the effect chains to stereo grouping and copy the
effects inserted on Chn 1 to the new stereo chain.
The effects inserted in chain 2 are deleted.
3. Click the Chn 2 button to switch the effect chains to stereo grouping and copy the
effects inserted on Chn 2 to the new stereo chain. The effects inserted in chain 1 are
deleted.
The result of this operation is a stereo effect chain containing the same effects as the pre-
vious mono chain.
Y56K User Guide
31
To Next Page
Loading...
Need help?
General
