Figure 6-3 Time setting screen
Step 2 Select a required date format from the Date Format drop-down list.
Step 3 Click next to 24 Hour to disable the 24-hour system. Then, the 12-hour system
is enabled. If 24 Hour is set to On, the 24-hour system is used and is enabled by
default.
Step 4 Click next to Sync Time to disable time synchronization. Time
synchronization is enabled by default. Time is synchronized with the PC time.
Step 5 After Sync Time is disabled, you can manually set the system time:
Click Date and scroll the mouse scroll wheel to select the year, month, and date.
1. Click Time and scroll the mouse scroll wheel to select the hour, minute, and
second.
2. Click Modify Time to save the time settings.
Step 6 Click OK to save settings or click Cancel to cancel settings.
----End
6.1.3 Time zone
Operation Steps
Step 1 On the System setting screen, choose Basic > Time zone to access the time zone
setting screen, as shown in Figure 6-4.
To Next Page
Loading...
