Figure 5-8 Processing method screen
2. Click of “Buzzer alarm”, Push message”, “Alarm message”, “Linkage
record” respectively to enable or disable these function.
3. Click OK to save processing method settings or click Cancel to cancel the settings.
Step 6 Click OK to save video loss settings or click Copy to all, then click OK to apply the
video loss settings to cameras of all channels.
----End
5.5 Motion Detection
Motion detection refers that an alarm is triggered when an image in a specified area
changes.
Operation Description
Click Menu in the upper left corner of the camera management screen and choose
Motion Detection to access the Motion Detection screen, as shown in Figure 5-9.
To Next Page
Loading...
Need help?
General
