Figure 9-12 DDNS setting interface
Step 2 Click the button to enable the DDNS function. It is disabled by default.
Step 3 Select a required value from the Protocol drop-down list.
Step 4 Set Domain name, Account, and Password.
Step 5 Click Apply to save DDNS network settings.
An external network can access an address specified in the DDNS settings to access the
DVR.
----End
9.5.2.4 SMTP
Operation Steps
Step 1 Click SMTP label to enter the SMTP setting interface, as shown in Figure 9-13.
To Next Page
Loading...
