Weidemann Basic line 4080T - Page 12

Preface
2.1 Operator’s manual
12
Operator’s Manual | 4080T Basic Line | 1000408123 | 05/2019 | [en]
2.1.4
Information for the buyer and operating company
• The buyer or operating company is responsible for the user’s/operat-
ors’ training in safe working on and with the vehicle.
– We recommend repeating training at regular intervals.
• The buyer or operating company is responsible for ensuring that any
additional safety regulations applicable in the country of use of the
vehicle are followed.
• In Germany, the Operational Safety Ordinance (BGVA1/Be-
trSichV§10) requires the buyer or operating company to have the
vehicles and attachments inspected regularly.
– In other countries, observe the relevant national regulations.
• At the beginning of this manual an illustration of the declaration of
conformity is shown. The illustration shows the declaration of con-
formity without the data corresponding to the vehicle. The corres-
ponding data for the vehicle varies depending on the equipment. The
corresponding data is contained in the original declaration of con-
formity, which is supplied with the vehicle as an original document.
2.1.5
Information for the operator
• You must always obey the safety regulations in this operator's
manual and the safety rules applicable in each case for operating the
vehicle.
• The vehicle may only be operated by persons who are physically,
mentally and professionally suited for this work.
• Persons under the influence of alcohol or drugs may not use the
vehicle.
• The operator is the person operating and/or driving the vehicle.
• The operator must have received instruction on the vehicle before the
first journey or the first operation.
• The operator must carefully read and understand the operator's
manual before the first drive or the first operation. In particular, the
chapter on safety see Safety on page 20.
• Before working with the vehicle, operators must familiarize them-
selves with all the control elements and their functions, and with the
handling of the vehicle.
• Before commissioning the vehicle, the operator of the vehicle must
ensure that it is in a perfect condition, and during operation, the oper-
ator must observe the regulations regarding operation.
• The operator is responsible for ensuring that the vehicle and its use
do not pose a risk.
• Work on the vehicle may only be performed by instructed technically
trained personnel that has been authorized by the operating com-
pany. Any person involved in operation, care, maintenance, servicing,
repair work or transport of the vehicle must read, understand and fol-
low the complete instructions in the operator’s manual and in particu-
lar the safety instructions.
• Observe and follow the legal regulations of your country.