Operation
7.8 Working with the vehicle
130
Operator’s Manual | 4080T Basic Line | 1000408123 | 05/2019 | [en]
Fig.116: Button for differential lock
The differential is locked with the differential lock. This avoids uneven
wheel spin. The differential lock in the axles prevents the differential gear
from having a compensating effect, i.e. the driving force acts uniformly on
all wheels.
Operate the differential lock with the button on the joystick.
▪ Press and hold the button.
ð Control light
illuminates in the display.
ð The differential lock is switched on.
▪ Release button.
ð Control light
does not illuminate in the display.
ð The differential lock is switched off.
7.8.8
Coupling attachments
Information on attachments
WARNING
Accident hazard due to tipping over of vehicle!
When the attachment is loaded, the weight ratios of the vehicle change.
There is a tipping hazard, in particular in curves. This may result in an ac-
cident, which may result in serious injury or death.
► Keep the loader unit as close as possible to the ground during
vehicle travel.
► Do not exceed the permissible payloads.
► Adapt the travel speed to the surrounding conditions and material to
be loaded.
► Close the cab doors.
► Fasten your seat belt.
WARNING
Risk of accident due to incorrect or damaged attachments!
Incorrect or damaged attachment can cause accidents, which can lead to
serious injuries or death.
► Do not use attachments that are not approved.
► Only use approved attachments.
► Do not use any damaged attachments.
► Before starting work, always check the attachments for damage, cor-
rect locking and firm installation.
► Do not work with a damaged attachment mount or lock.
To Next Page
Loading...
