Transportation
Transporting the vehicle 8.3
173
[en] | 05/2019 | 1000408123 | 4080T Basic Line | Operator’s Manual
Fig.170: Lashing eyes on the
vehicle
Safety instructions on tying down the vehicle
• The transport vehicle must have a sufficient bearing load and a suit-
able loading surface.
• The loading surface of the transport vehicle must be clean.
• The gross weight rating and the axle loads of the transport vehicle
must not be exceeded.
• Only use certified lifting and fastening gear. Adhere to the inspection
intervals .
• Do not use any lifting and fastening gear that is dirty, damaged or not
of sufficient size.
• In order to secure the vehicle on the loading surface, use only the
fastening points provided for this purpose.
• Ensure that nobody is in or on the vehicle during transportation.
• The load-securing regulations must be observed.
• Bear in mind the weather conditions (e.g. ice, snow).
8
To Next Page
Loading...
