EasyManua.ls Logo

Weidemann Basic line 4080T - Page 187

Weidemann Basic line 4080T
250 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance
Checking fill levels 9.6
187
[en] | 05/2019 | 1000408123 | 4080T Basic Line | Operator’s Manual
9.6.2
Check fill level of brake fluid.
WARNING
Accident hazard due to malfunctioning brakes!
The braking system is a crucial safety component. Improper maintenance
can lead to failure of the braking system. This may result in accidents that
could result in serious injury or death.
All repair work on the braking system may only be carried out by trained
personnel at an authorized service center.
Check the brake function once a day.
ð If the brake fluid level drops between two checks, there is a defect
in the braking system.
Do not operate the vehicle with malfunctioning brakes.
Perform service according to the service intervals.
Fig.180: Brake fluid tank
Check the brake fluid
The tank for the brake fluid is located under the engine cover. The check
marks MAX and MIN are located on the side of the tank.
If the brake fluid level in the tank has dropped below the MIN mark, do
not drive the vehicle anymore. Only drive the vehicle again after it has
been inspected and approved by an authorized service center.
9.6.3
Fill level engine oil
NOTICE
Damage to the engine due to incorrect fill level of the engine oil!
The oil level must not fall below the MIN mark on the oil dipstick.
The oil level must not exceed the MAX mark on the oil dipstick.
9

Table of Contents

Related product manuals