Maintenance
9.6 Checking fill levels
188
Operator’s Manual | 4080T Basic Line | 1000408123 | 05/2019 | [en]
Preparation for maintenance In the engine compartment
1. Park the vehicle on a stable, level and dry surface.
2. Secure the vehicle with the parking brake.
3. Retract the loader unit and lower it to the ground.
4. Switch off the ignition and remove the starting key.
5. Let the engine cool down.
6. Open the engine cover.
9.6.3.1
Checking the engine oil level
1. Pull out oil dipstick.
2. Wipe the oil dipstick with a clean and fiber-free cloth.
3. Plug the oil dipstick back in.
4. Pull out the oil dipstick again.
5. Check the oil level.
ð The oil level must be between the minimum and maximum mark-
ings.
6. Plug the oil dipstick back in.
9.6.3.2
Adding engine oil
NOTICE
Using the wrong engine oil can damage the engine!
► Only use engine oil with the correct specification.
► Use a funnel with a hose extension as a filling aid.
To Next Page
Loading...
