Malfunctions
10.2 Fault indications on the display
228
Operator’s Manual | 4080T Basic Line | 1000408123 | 05/2019 | [en]
Fig.214: Warning lights of the elec-
tronics in the display
Warning light for vehicle electronics
If the warning light lights up during operation, switch off the
engine and switch on the ignition.
• If no error code appears in the vehicle display:
– Start the engine and resume vehicle travel.
• If an error code appears in the vehicle display:
– Note the error code and contact an authorized ser-
vice center.
Warning light for vehicle electronics
If the warning light lights up during operation, switch off the
engine and switch on the ignition.
• If no error code appears in the vehicle display:
– Start the engine and resume vehicle travel.
• If an error code appears in the vehicle display:
– Note the error code and contact an authorized ser-
vice center.
Warning light for engine electronics
Illuminates or flashes if one or more engine-operation val-
ues are outside the normal range – stop the engine and
switch on the ignition.
• If no error code appears in the vehicle display:
– Start the engine and resume vehicle travel.
• If an error code appears in the vehicle display:
– Note the error code and contact an authorized ser-
vice center.
Warning light for engine electronics
Illuminates or flashes in case of one or more errors in the
engine electronics. The engine switches itself off. If the en-
gine does not switch itself off - turn it off.
• If no error code appears in the vehicle display:
– Start the engine and resume vehicle travel.
• If an error code appears in the vehicle display:
– Note the error code and contact an authorized ser-
vice center.
To Next Page
Loading...
