Commissioning
Boarding and disembarking 6.1
77
[en] | 05/2019 | 1000408123 | 4080T Basic Line | Operator’s Manual
Close door from outside
To prevent third parties from using the vehicle, always lock both doors
after getting out and lock them with the starting key.
1. Close the door against the spring pressure.
2. Door locks into the door lock.
ð Door is closed.
3. Lock the door with the starting key.
6.1.1.3
Locking doors into place and opening doors
Fig.49: Locking door into place
Locking the doors into place
The doors can be opened together with the side window and locked in
this position.
1. Open the door.
2. Fold the door back.
3. Lock the door by snapping it into place.
ð Door is locked into place.
Information
Depending on cab version, tires and mudguard width, the doors cannot
be locked together with the side windows in the open position on all
vehicles.
Fig.50: Unlocking
Loosen door lock
1. Move the release lever from the inside.
ð Locking is released.
2. Fold the door forward.
3. Engage the door in the door lock.
ð Door is closed.
6
To Next Page
Loading...
