Weidemann Basic line 4080T - Page 78

Commissioning
6.1 Boarding and disembarking
78
Operator’s Manual | 4080T Basic Line | 1000408123 | 05/2019 | [en]
Fig.51: Position door slightly in open
position
Positioning door
The doors can be opened to a gap.
1. Fold down the lever.
2. Engage the lever in the lock and lock into place.
ð Door is locked open into place.
6.1.1.4
Opening and closing the side window
CAUTION
Crushing hazard due to unlocked windows!
The windows can cause crushing when closing.
► Always lock the windows.
► Use provided handles for closing.
1
2
Fig.52: Opening and locking the
side window
The side windows can be locked in the open position. The side windows
are opened and closed with lever 1.
1. Actuate lever1.
ð Side window is open.
2. Press the side window against the locking mechanism.
ð Side window is locked.
1. Actuate lever2.
ð The locking mechanism of the side window is released.
2. Closing the side window with lever 1.
3. Lock the side window.
ð Side window is closed.
Opening the side window to a gap
The side windows can be opened to a gap. To do so. let lever1 lock into
place. Before leaving the vehicle, check that the doors, side windows and
rear window are closed.