Commissioning
Setting up the operator station 6.2
87
[en] | 05/2019 | 1000408123 | 4080T Basic Line | Operator’s Manual
Fig.67: Steering wheel adjustment
lever
The height and inclination of the steering column can be individually ad-
justed according to body size.
1. Push the lever down and hold it.
ð The steering wheel is unlocked.
2. Adjust the steering wheel.
3. Release the lever.
ð The steering wheel is adjusted and locked.
6.2.4
Adjusting the mirrors
WARNING
Accident hazard due to restricted field of vision!
The operator may fail to see persons and objects due to the limited field
of vision.
► Check field of vision before commissioning.
► Adjust the mirrors before commissioning the vehicle.
► Remove obstacles within the work area.
► Move the loader unit to the transport position when moving loads.
► Ensure a clear field of vision using suitable measures (e.g. guide or
camera).
The field of vision describes the visible area that the operator can see
from the seat. Mirrors or camera systems can be installed on the vehicle
to support the operator.
6
To Next Page
Loading...
