5107364139
9
EN
blueMatic EAV4 / EAV4+ Installation, Operating and
Maintenance Instructions
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.com ∙ Subject to technical changes
Set tappet contact
T-SET STÖßEL O. STULP + SB U24 X 7,5 SW
(5035741)
Sash part tappet contact and frame part set
• Frame part with cable (0.6 m)/plug
connector
• Sash part with socket, without cable
• with 2 x countersunk screws 3 x 14 mm TX10
for mounting on the face plate
• Plus/Minus/Signal identification
T-STÖßEL STULP FLÜGEL ...
Face plate for sash part tappet contact in
dierent versions/for screw connection
with sash part tappet contact/screws
included in the tappet contact set indicated
above
Face plate for sash part
T-DISTANZPLATTE 6 MM KS SW (optional)
()
Spacer plate 6 mm for installation between
face plate and sash part to reduce the
tappet length, e.g. due to:
• 9 mm Eurogroove position, small Eurogroove
positions
• with a small residual airgap
• for specific hinge situations (e.g. concealed
hinges)
Spacer plate
To Next Page
Loading...
