Xerox 560 - Page 272

Xerox Color 550/560 Printer
User Guide
272
Maintenance
Gently lower the new Charge Corotron into the machine straight down, and not at an angle.8.
Grasp the amber-gold colored casings on the new Charge Corotron and pull towards the front of the
machine until you hear a clicking noise to indicate the Charge Corotron is in place.
9.
Push in the Drum Drawer completely. Return the Release Handle to its original position.10.
Return the R1-R4 handle to the original position and close the front door.11.
Insert the used Charge Corotron into an empty container for recycling.12.
Grasp both of the amber-gold colored casings on the old Charge Corotron and push towards the back of the
machine. You will hear a clicking noise indicating that it is being released.
6.
Remove the old Charge Corotron by holding the amber-gold colored casings provided at the both ends of the
Charge Corotron and gently pulling straight up.
7.