Error Troubleshooting
Phaser 6600 and WorkCentre 6605 Xerox Internal Use Only
Service Manual
2-62
Registration Parameter
Specifies the parameter value of the registration.
Auto Registration
Specifies whether to set Auto Registration to ON or OFF.
Sensor Parameter
Specifies the setting value of the Sensor Parameter.
Vertical Scan Mag.
Specifies the parameter value of the Vertical Scan magnification.
Item Range
Regi FB Lead 3 digits (each digit 0 - 9)
Regi FB Side
Regi DADF Lead (Front)
Regi DADF Side (Front)
Regi DADF Lead (Back)
Regi DADF Side (Back)
Item Range
Auto Registration ON, OFF
Item Range
Feed Sensor 3 digits (each digit 0 - 9)
Item Range
Mag FB COLOR 2 digits (hexadecimal)
(each digit 0 - 9, A - F)
Mag FB GRAY
Mag DADF COLOR
Mag DADF GRAY