[Note]
If the after-update option is included, the network connection state information is updated to the latest information, but
depending on the configuration of the network, it might take some time for this update to be completed.
[Example]
After updating the network's connection state, save the snapshot file.
SWR2311P#snapshot save after-update
4.21.4 Delete snapshot
[Syntax]
snapshot delete
[Input mode]
priviledged EXEC mode
[Description]
Deletes the snapshot file.
[Example]
Delete the snapshot file.
SWR2311P#snapshot delete
4.22 Firmware update
4.22.1 Set firmware update site
[Syntax]
firmware-update url url
no firmware-update url
[Parameter]
url : Single-byte alphanumeric characters and single-byte symbols (255 characters or less)
URL at which the firmware is located
[Initial value]
firmware-update url http://www.rtpro.yamaha.co.jp/firmware/revision-up/swr2311p.bin
[Input mode]
global configuration mode
[Description]
Specify the download source URL used when updating the firmware from a firmware file located on a web server.
The input syntax is "http://server IP address or hostname/pathname".
If the server's port number is other than 80, you must specify this within the URL, using the syntax "http://server IP address or
hostname:port number/path name".
[Example]
Specify http://192.168.100.1/swr2311p.bin as the firmware download URL.
SWR2311P(config)#firmware-update url http://192.168.100.1/swr2311p.bin
SWR2311P(config)#
4.22.2 Execute firmware update
[Syntax]
firmware-update execute [no-confirm]
[Keyword]
no-confirm : Don't confirm the firmware update
[Input mode]
priviledged EXEC mode
Command Reference | Maintenance and operation functions | 103
To Next Page
Loading...
